Select your Product
A1 Single Shot Cartridge Filler
Output Per Hour 300 - 500
Setup time has been brought down to a minimum with the ML-1VF. Simply plug in, calibrate, and start filling your cartridges.
A1 Single Shot Cartridge Filler Specifications
Fill Rate (Per Hour)*
300 - 500
Weight (kg)
30
Width (mm)
485
Height (mm)
590
Depth (mm)
500
Power Supply
AC 110 - 220V 300W
Dispensable Volume Range
0.1ml- 1.3ml
*Based on 0.5g cartridge
A1 Single Shot Cartridge Filler Components
Volumetric Filling Nozzle
Designed to optimize low-volume product filling, the VF nozzle dispenses product with a +/- 2% filling accuracy. Set the exact product volume you want and start filling!The product is pushed through the line from the pressure vessel and into the syringe through the VF dual valve where is it then dispensed out of the nozzle tip and into the cartridge or capsule.
Visit our suppliers:
Pressure Vessel
The bottom-out pressure vessels are designed with back pressure to guarantee all product flows evenly and consistently through the tubing. This ensures every bit of product is not wasted and reduces the chance of air bubbles in your product.The stainless-steel tanks range from 1L, 1g, 3g, 5g, and 10-gallon in size. All our pressure vessels are compatible with our mixers and heating systems for even heat distribution throughout the tank and cleaner filling process.
Visit our suppliers:
Capping Solution
Our capping solutions allow you to safely and efficiently close your press top cartridge caps within 45 seconds. This reduces any chance of leaking, clogging, or oxidation that may compromise product quality.